About
Thank you for your interest in my most unique earring
collection! Available in two different styles, both the Spiral™ and
the UTwo™ are the patented forerunner earring styles specifically
designed for the multiple
pierced lobe. No more lost or mismatched earring combinations!
You'll only need one earring!
The most frequently asked questions I receive are:
What
are they made of? Sterling silver or 14k yellow gold-filled round
wire. (Niobium & 14k yellow gold available by special
order).
Will they fit the distance
between your lobe piercings or the angle in which they’re
pierced? Both
the Spiral™ and the UTwo™ earring styles are easily
adjustable to accommodate the piercing placement
for each individual lobe.
(Not designed to
reach to a cartilage piercing, however.)
How do you put them in? There
is a left and a right to both the Spiral™ and the UTwo™.
The Spiral™ enters the lobe starting with the
first piercing, then spirals around so that it enters the 2nd
piercing
again
through the front of the earlobe. No need for backings! The UTwo™ enters
the lobe straight on, with the lower portion of the earring resting
in the first piercing and the second post goes into second piercing.
Backs are needed with this style.
Here are some specifics…
Remembering there
is a left and a right to both multiple pierced styles, you’ll
notice one wire is slightly higher than the other side...the lower
side
should
rest in the first piercing, the higher
side is
meant for consecutive piercings. If you put the earring
in the wrong
ear, it will hang crooked...time to switch sides!
As mentioned above, both the Spiral™ and the
UTwo™ are fully adjustable to accommodate your piercing placement.
To adjust the Spiral™...Simply
pull the wires slightly apart for a wider lobe. For piercings more
on a diagonal,
offset the
wires simply by pushing up on the outer wire designated for
the second
hole and pushing down on the wire meant for the original piercing.
(This side will have the drop suspended from a loop attached to
the earring.)
To adjust the UTwo™...Simply
pull the wires slightly apart for a wider lobe. To adjust the UTwo™ for
lobes that are pierced on more of a diagonal simply locate a dowel
shaped implement (a
pen or a
Sharpie® marker works well for this), about 1/2 inch
in diameter and place
in the curve of the earring, pushing up on the side meant
for the 2nd piercing to get the appearance of a J- shape.
(The round
dowel keeps the shape of the earring.)
The UTwo™ is unique in that you can remove
the existing drop and interchange it with a drop of another color,
shape or size. See our selection of drops (product
page) available in assorted sets.
How do I order?
Click here to order your Margaret Ross Mulitiple
Pierced Earrings! (product
page)
|